Chipper/ShredderInstruction & Owners ManualCrary CompanyBox 849West Fargo, ND 58078(701) 282-5520 (800) 247-7335FAX: (701) 282-9522Manufacture
7SECTION 2engine)Turn knob clockwise for full throttle opera-tion. Turn knob counter clockwise for idle on warmup. Turn knob all the way down to shut
82.1.4 Starting(Towable Model)Caution: Move machine to a clear, level area outdoorsbefore starting. do not operate machine on a paved,concrete, or gra
9MACHINE'S SHREDDING CAPABILITY, DO NOT ATTEMPTTO HOLD ON TO MATERIAL INTENDED FOR SHREDDINGONCE IT HAS BEEN PLACED IN THE HOPPER.1. Place materi
10SECTION 3Service and MaintenanceBeforeEachUseEvery10HoursEvery25HoursEvery50HoursEvery100HoursEvery200HoursEvery300HoursEvery800HoursEvery1yearsInte
113.1 Removing Discharge Screen1. Remove the discharge screen by removing the two5/16 inch retaining bolts from the bottom of thescreen.2. Pull the bo
1273.2.2 Setting Chipping BladeClearanceThe chipping blades should clear the chipper blocklocated directly under the chipper chute by 1/16 inch to1/8
133.3 Replacing Shredder KitCare must be taken to insure knives and spacers areinstalled properly to maintain rotor balance.1. Remove discharge screen
14SECTION 35. Replace spark plug wire, restart engine and resumeoperation.3.3.2 Cleaning Plugged Rotor (PTOModelsDo not operate machine without proper
15SECTION 33. Remove the round shield connected to the belt guardthe covers the PTO shaft by removing the two 5/16"nuts.4. Remove the PTO shaft f
16TROUBLESHOOTINGTroubleshootingSuggestedRemediesa) Use proper settingb) Fill fuel tankc) See your dealera) Use branch orsimilar object toclear discha
PHONEBEARCATHow toContactBear CatM-F, 8 a.m. to 5 p.m.Central TimeCrary Bear Cat237 NW 12th StreetPO Box 849West Fargo, ND 58078Serial Number Decal Lo
Declaration of Conformity The undersigned manufacturer: Crary Industries, Inc. 237 NW 12th Street P.O. Box 849 West Fargo, ND 58078-0849 Declares
Box 849West Fargo, ND 58078(701) 282-5520 (800) 247-7335FAX: (701) 282-9522HEALTH WARNINGGASOLINE, DIESEL, ANDOTHER PETROLEUM PRODUCTSHarmful or f
WARRANTYWarrantyChipper and Hydraulic Feed Limited WarrantyCrary Bear Cat products are warranted for two years from the date of sale to the original c
1CONTENTSContentsSection 1: Safety Instructions ... 21.2 Safety Decals ...
2Safety Instructionsthis machine wearing loose clothing particularly if ithas drawstrings which could wrap around or getcaught in the machine.3. Opera
3SECTION 15. Do not allow processed material to build up in thedischarge area; this may prevent proper dischargeand can result in kickback of material
4SECTION 1PN 17846Safety and instruction decals are located on the chipper frame and engine. Replace any decal that is damaged orunreadable. For locat
5Assembly1. Remove from crate.2. Place hopper assembly on top of shredder frame.The tabs on the bottom of the hopper should beplaced inside of the shr
6SECTION 26. Never inspect or work on PTO drive area withoutfirst disengaging PTO and shutting off the tractorengine.7. Start tractor engine and engag
Comments to this Manuals