Echo-bear-cat 70487 User Manual

Browse online or download User Manual for Hardware Echo-bear-cat 70487. Echo Bear Cat 70487 User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Instruction Sheet
Instructions
PN 16087
Rev. 050409
SUBJECT: SINGLE SPEED
BLOWER ATTACHMENT (PN 70487)
FITS MODELS: SC5540 (70554)
AND SC5614 (71020)
Before inspecting or servicing any part of this machine,
shut off power source, remove key, disconnect the
battery cables and make sure all moving parts have
come to a complete stop.
WARNING
This kit adds a blower attachment to the 5" chipper/
shredders. The blower has a 360-degree rotatable
discharge chute and an adjustable deflector cap.
ASSEMBLy
Remove the rotor shaft end cap from the chipper.1.
Remove one (1) 5/16 lock nut from discharge door 2.
rod, pull out rod and remove discharge door.
Install pulley, bushing and key onto rotor shaft. Do not 3.
tighten bushing bolts or set screw at this time.
Hold blower assembly up to frame, install new rod 4.
into frame and blower assembly and secure with
5/16" lock nuts from kit. Slide bottom end of blower
until it fits against frame assembly.
Install belt onto the pulley that was just installed and 5.
onto the pulley on the blower assembly. The idler
pulley should run on the inside of the belt for correct
tension. Align pulleys to within 1/16".
Tighten bushing bolts in a clockwise direction and 6.
bushing set screw on rotor shaft pulley. Torque to
manufacturer's specifications.
Page view 0
1 2 3 4

Summary of Contents

Page 1 - Instructions

Instruction SheetInstructionsPN 16087Rev. 050409SUBJECT: SINGLE SPEED BLOWER ATTACHMENT (PN 70487)FITS MODELS: SC5540 (70554) AND SC5614 (71020)Bef

Page 2 - OPERATION

Instruction SheetInstall belt guard support bracket onto top 1/2" bolt for 7. bearing on main frame and secure with 1/2" lock nut.If you a

Page 3 - FOR PTO

Instruction Sheet123456789101112131415161718192021222425262728293031323334REMOVE FOR PTO MODEL35363738392340SINGLE SPEED COMMERCIAL BLOWER, PN 7048

Page 4 - IMPORTANT

UNPLUGGING ThE BLOWERIf the machine plugs, turn off the power source and 1. make sure all moving parts have come to a complete stop. Remove t

Comments to this Manuals

No comments